Comments on: Toner Photo Transfer Tutorial for Polymer Clay – Mistakes to Avoid

By: Amy R

Amy R — Tue, 31 May 2011 23:39:33 +0000

Ok, thanks. I am going to try it again and also use the sculpey glaze. I’ll let you know how it goes.

By: Cindy Lietz@Sculpey Glossy Glaze

Cindy Lietz@Sculpey Glossy Glaze — Mon, 30 May 2011 18:25:29 +0000

@Amy R: Hi Amy, I am thinking that there probably is still some paper left on your transfer and when it ‘dried’ in the baking process, it caused your transfer to become cloudy. Applying a finish may help this to some extent, depending on how much paper was left behind.

You could also try rubbing your baked transfer lightly under water, to see if you can remove a little more paper, before adding a finish. Be careful not to rub too hard, or you will remove some of the transfer as well.

One finish that may work for you is the Sculpey Glossy Glaze. (Click the link by my name for more info.) You can add this before or after you bake. If you add it before baking, it may prevent the transfer for clouding up in the first place.

You will have to experiment a bit to see what works best for you. Do come back here and let us know how it goes. Good luck!

By: Amy R

Amy R — Sat, 28 May 2011 20:25:48 +0000

Hi. I did the transfer and it came out great until I baked It. The color black became gray and I also did I color transfer and all the colors turned out dull and opaque. Why? Is it the ink quality? Too much heat? I baked it at 275F. Should I apply a finish? Will this give its color back. What should I do? Thank you.

By: Phaedrakat

Phaedrakat — Tue, 27 Jul 2010 09:58:29 +0000

@Jocelyn: Oh, duh! (Don’t I feel like a big dummy!) I actually have a Lexmark all-in-one, but I haven’t tried transfers with it yet. Please let me know if you come up with any special tips for it… :D

By: Cindy Lietz@Polymer Clay Facebook

Cindy Lietz@Polymer Clay Facebook — Thu, 22 Jul 2010 17:34:47 +0000

@Deb Williams: Hi Deb, just thought I’d better pop in here and mention that I have a really cool way to incorporate stamps and any other types of paper materials into your polymer clay art projects. I will be doing a tutorial soon, so stay tuned!

By: Jocelyn

Jocelyn — Sat, 17 Jul 2010 09:38:26 +0000

Thanks, Kat, you are such a doll. Meant has anyone done transfers with a Lexmark machine…what tips or suggestions might apply with that model. Still taking your advice and googling it. Betcha something is out there. Many thanks for responding.

By: Phaedrakat

Phaedrakat — Sat, 17 Jul 2010 08:08:05 +0000

@Jocelyn: Hi Jocelyn, usually you can just Google the make & model of your printer, along with “manual” or “instructions” or something like that. I’ve done this with all kinds of electronics or appliances, and they usually have a pdf file manual. Good luck!

By: Jocelyn

Jocelyn — Thu, 15 Jul 2010 15:17:30 +0000

I have a Lexmark X5070 combination model. Does anyone know of specific instructions for this model? Just looking for some encouragement that it is possible before I delve into trying.

By: Deb Williams

Deb Williams — Wed, 14 Jul 2010 20:30:48 +0000

Hi,
I am trying to use vintage postage stamps and labels on my Fimo clay. What is the best thing to use to adhere the stamps and labels to the clay and then how do I prevent it from puffing up in areas after baking. Also what is the best product to use for a matte finish on the clay pieces once they are baked.

thank you

By: Cindy Lietz@Leopard Cane Tutorial

Cindy Lietz@Leopard Cane Tutorial — Fri, 14 May 2010 21:28:42 +0000

@Stacie: Phaedrakat has done a great job in trying to get to the bottom of your problem. Hopefully you will come back and answer her questions so we can help determine an answer for you.

There is nothing wrong with being particular. This method can often be far from perfect. If you need something that is absolutely pristine, then you may want to try the water slide transfers that are available. (just Google it) Though water slide transfers have more of a plastic-y decal kind of look to them as compared to the ink transfers such as this method here.

Do let us know exactly how you’re doing it and we will see if we can help you.